-
Release time: 2022-02-17
A large number of grinding racks are generally manufactured by mechanical equipment, and the precision of the grinding racks is relatively good. Generally, after the rack is ground, the machining accuracy can be greatly improved. When the rack is ground,
-
Release time: 2022-02-16
Planetary reducer is applied to mechanical drive equipment. In the application industry of reducer, it is used in many industries because of its excellent performance; planetary reducer is mainly composed of planetary gear, sun gear, inner gear, outer gea
-
Release time: 2022-02-16
The difference between the straight gear reducer and the helical gear reducer of the German Newcastle reducer: the difference can be made from the shape design: the gears inside are different, one is oblique and the other is straight; it can also be very
-
Release time: 2022-02-16
The 90-degree angle planetary reducer is a commonly used equipment. It is a high-torque device. It plays a very important role in industrial automation and other industries. After a long time of use, wear will occur. The 90-degree angle planetary reducer
-
Release time: 2022-02-15
In the field of reducer application, what everyone knows more about the reducer is that it can play the role of deceleration and torque increase. Therefore, when selecting a reducer, these two aspects are considered the most, and other factors are often i
-
Release time: 2022-02-15
The coupling is mainly used to transmit the power and motion of the drive shaft to the driven shaft and the load. It can absorb the deviation, shock, vibration and noise between the drive shaft and the driven shaft, and can also cut off the drive shaft on
-
Release time: 2022-02-14
R+W bellows coupling is mainly composed of two shaft sleeves and the middle bellows. Generally, welding and adhesion are used. The common type of shaft sleeve is made of stainless steel. is steel. The application industry of bellows coupling is also very
-
Release time: 2022-02-14
There are many types of reducers in Newcastle, Germany. There are also different types of reducers in different industries. The installation environment here is also different. Today, I will introduce the installation requirements and precautions of flang
-
Release time: 2022-02-13
Planetary reducers are used in many industries. Manufacturers generally provide relevant technical information, installation methods and other knowledge, but there are many places to pay attention to. Today, I will introduce the reasons for errors in the
-
Release time: 2022-02-11
1. Standard gear transmission is widely used because of its simple design, good interchangeability, easy manufacture and installation, and because its transmiss……
-
Release time: 2022-02-11
The gear reducer is a set of gears that reduce the speed and increase the torque. The gear reducer is literally the use of gears with different numbers of teeth to reduce the output shaft speed of the motor to the speed you need. The gear reducer can be u
-
Release time: 2022-02-10
In modern industrial robots, servo motors driven by pulse signals and speed-regulated and decelerated have always been the main equipment power source. Then the servo motor itself can realize speed regulation. Why does the industry still use the servo pla
